![](/images/backgrounds/262813/262813-13632x1.png)
12Changing the settings
3Use / to select security type, then press
ENTER.
Security Select
None
WEP
WPAPSK TKIP
WPAPSK AES
• If you select None. Step 5
4Use /// to enter the Pass Phrase or
WEP Key.
WPS connection setting
WPS is abbreviation of
This unit supports
Important
•Network Type must be set to Wireless or Auto to use WPS connection. See page 28 to change the network type.
1 Press SET UP.
The Initial Setup screen is shown on the main display.
2Select Network Setting WPS.
3Use / to select PBC (Push Button
Configuration) or PIN Input, then press ENTER.
Enter Password
[SOUND] | Change Text |
[CLEAR] | Delete One Character |
•/: Moves the adjusting digit.
•/: Changes displayed character.
•SOUND: Switches character types.
•CLEAR: Deletes one character at a time.
5Use / to select DHCP OFF, then press
ENTER.
The IP address setting screen is displayed.
6Use ///or number buttons to adjust the numbers, then press ENTER.
•/: Moves the adjusting digit.
•/: Increases or decreases values.
•CLEAR: Deletes one character at a time.
•The items shown below are adjustable. For details on adjustable items, see step 2 in Wired Setting on page 31.
Static IP Address Subnet Mask Gateway address Preferred DNS/Alternate DNS Proxy Setup
32
Select WPS Method
PBC (Push Button Configuration)
PIN Input
•PBC (Push Button Configuration)
Connection settings are made automatically simply by pressing the WPS buttons on the WPS compatible wireless LAN device. Follow the instructions on the main display. This is the simplest way of making the settings, and is possible when the WPS compatible wireless LAN device is equipped with WPS button.
•PIN Input
Connection settings are made by inputting the
En