Bluetooth® Audio playback (optional)

06

2 Press STANDBY/ON to turn the power on.

3Press FUNCTION / or BT AUDIO on the top panel of the unit to select BT AUDIO as the

input source.1

The BT AUDIO indicator lights and BT Audio is shown on the main display.

Setting the PIN code

Set this unit’s PIN code to the same setting as that for the Bluetooth wireless technology device used. Supported PIN code setting values include 0000, 1234 or 8888.

• Default setting: 0000

1Press FUNCTION / or BT AUDIO on the top panel of the unit to select BT Audio as the input source.

The BT AUDIO indicator lights and BT Audio is shown on the main display.

2Press SET UP.

3Use / to select Option Settings BT PIN

Select, then press ENTER.

Option Setting

BT PIN Select

Volume Limit Setting

Internet Parental Lock

AutoMode Change

4Use / to select the PIN code, then press

ENTER.

The PIN code is stored.

Pairing Bluetooth® adapter and Bluetooth wireless technology device

“Pairing” must be done before you start playback of Bluetooth wireless technology content using Bluetooth® adapter. Make sure to pair devices the first time you operate the system or any time pairing data is cleared. “Pairing” is the step necessary to register Bluetooth wireless technology device to enable Bluetooth communications.2 For more details, see also the operating instructions of your Bluetooth wireless technology device.

1Press FUNCTION / or BT AUDIO on the top panel of the unit to select BT Audio as the input source.

The BT AUDIO indicator lights and BT Audio is shown on the main display.

2Turn on the Bluetooth wireless technology device that you want to pair, place it near the system and set it into pairing mode.

Pairing starts.

3Check to see that the Bluetooth® adapter is detected by the Bluetooth wireless technology device.

•If the Bluetooth wireless technology device cannot be connected to the unit, perform the connection operation from the Bluetooth wireless technology device.

Listening to music contents of Bluetooth wireless technology device

1Press FUNCTION / or BT AUDIO on the top panel of the unit to select BT Audio as the input source.

The BT AUDIO indicator lights and BT Audio is shown on the main display.

2Make connection between the Bluetooth wireless technology device and the unit.

•See Pairing Bluetooth® adapter and Bluetooth wireless technology device above.

Español Français English

Note

1When the Bluetooth® adapter is not connected and BT Audio is selected as the input source, the error message BT Adapter Not Connected will be shown on the main display.

2• Pairing is required when you first use Bluetooth wireless technology device and Bluetooth® adapter.

• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device.

19

En