Changing the settings | 12 |
Settings | What it does | ||
Option | BT PIN Select | Use this to set the Bluetooth PIN code. (page 19) | |
| |||
| (0000/1234/8888) |
| |
|
|
| |
Setting | Volume Limit Setting | When On is selected, the volume can be set between 0 to 30. | |
(On/Off) | Each time this setting has been changed, the volume becomes to 0. | ||
| |||
|
|
| |
| Internet Parental Lock | Restricts usage of internet radio using password. Select Internet Parental Lock to On/Off. | |
| (Change Password/Internet | You can set up the password from Change Password. (page 33) | |
| Parental Lock) |
| |
|
|
| |
| Auto mode select | When Power Save mode is selected, the unit will be automatically in the standby mode if no | |
| (Power Save mode/Demo | operation has done for more than 30 minutes. | |
| Mode/Off) | When Demo Mode is selected, the demonstration screen will start if no operation has done for more | |
|
| than 5 minutes. | |
|
|
| |
| Language | Change the language of the operation messages displayed on the main display. | |
| (English/Other languages) | Other languages: French, German, Netherlands, Italian, Spanish, Russian, Japanese | |
|
|
| |
| Quick Start Mode | When this is set to On, the time required for bootup will be shortened. In addition, | |
| (On/Off) | occur simultaneously when AirPlay is performed. Note, however, that when Quick Start Mode is set | |
|
| to On, the electrical current consumed in the | |
|
| that required when the power is turned on. Also, if the power cord is disconnected while Quick Start | |
|
| Mode is set to On, the next time the plug is reconnected, about one minute | |
|
| before the unit responds. Wait for one minute after reconnecting the cord before pressing | |
|
| STANDBY/ON. | |
|
|
| |
| Software Update | Use this to update unit software. | |
|
| ||
System Info | Use this to check unit information details. | ||
|
|
|
Español Français English
Using the timer
Setting the clock
Setting the clock before using the timer.1
1 Press SET UP.
The Initial Setup screen is displayed on the main display.
2Select Clock Setting Clock Adjustment.
3Select Auto or Manual.
If you select Manual, go to step 4.
•Auto works only when this unit is connected to the network. Connect to the network if you want to use automatic time adjustment.
4Use ///or number buttons to adjust the clock, then press ENTER.
•Using / moves the adjusting digit (hour/minute/ second/AM, PM2).
•Using / increases or decreases values.
Clock Adjustment
2 21 0 AM
H:M:S AM/PM
• If you press RETURN, the previous screen will be displayed.
Setting the
1 Press SET UP.
The Initial Setup screen is displayed on the main display.
2 Select Timer Setting.
The Timer Setting screen is displayed.
Note
1You’ll need to set the clock again if you unplug the unit (or in case of a power failure).
2The “AM” and “PM” indicators appear only when the Time Format is set to the 12H mode.
3When the unit is in iPod, FM, Internet Radio, or Aux modes, you can set the timer.
29
En