10Using the tuner
Chapter 10:
Using the tuner
Listening to the FM radio broadcasts
The tuner can receive FM broadcasts, and can save your favorite stations.
1 Press FUNCTION / to select Tuner.
The tuned frequency will be displayed on the main display.
2 Tune into a station.
When the tuner receives FM broadcasts, the TUNE indicator lights.
There are two ways to do this:
Automatic tuning - To search for stations, press and hold TUNE +/– for about a few seconds. This unit will start searching for the next station, stopping when it has found one. Repeat to search for other stations.
Manual tuning - To change the frequency one step at a time, press TUNE
Saving stations
You can save up to 9 station presets so that you always have easy access to your favorite stations without having to tune in manually each time.1
•Manually saving station presets
1 Press FUNCTION / to select Tuner.
The tuned frequency will be shown on the main display.
2Tune into a station.
3Press and hold a number button (1 to 9) for a few seconds.
The tuned frequency is preset to the selected number button. The previous station preset is overwritten.
•Automatically saving station presets
1 Press and hold PRESET + for a few seconds.
Auto tuning starts.
•The tuned frequencies will be preset to the buttons in numerical order.
•Auto tuning stops after the FM band has finished, or the limit of 9 presets has been reached.
Listening to station presets
1 Press FUNCTION / to select Tuner.
The tuned frequency will be shown on the main display.
2Press the number button (1 to 9) that stores the FM radio station.
Tip
•Press PRESET +/- repeatedly to selected the station preset in numerical order.
Note
1When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwrit- ten with the new one.
26
En