Changing the settings | 12 |
Wired Setting
1Use / to select DHCP Off, then press
ENTER.
The IP address setting screen is displayed.
2Use ///or number buttons to adjust the numbers, then press ENTER.
Static IP Address
192 . 168 . 2 . 4
•/: Moves the adjusting digit.
•/: Increases or decreases values.
Static IP Address
The IP address to be entered must be defined within the following ranges. If the IP address defined is beyond the following ranges, you cannot play back audio files stored on components on the network or listen to Internet radio stations.
Class A: 10.0.0.1 to 10.255.255.254 / Class B: 172.16.0.1
to 172.31.255.254 / Class C: 192.168.0.1 to 192.168.255.254
Subnet Mask
If an xDSL modem or a terminal adapter is directly connected to this unit, enter the subnet mask listed in your ISP documentation. In most of the cases, enter 255.255.255.0.
Gateway Address
If a gateway (router) is connected to this unit, enter the corresponding IP address.
Preferred DNS/Alternate DNS
If there is only one DNS server address listed in your ISP documentation, enter Preferred DNS. In case there are more than two DNS server addresses, enter Alternate DNS in the other DNS server address field.
Proxy Setup
Select Use Proxy Server when you connect this unit to the Internet via a proxy server. Enter the IP address of your proxy server in the Proxy Server Address field. Also, enter the port number of your proxy server in the ‘Proxy Port’ field.
Wireless Setting
1Use / to select Manual, then press
ENTER.
Tip
•To select Auto, select the network name which you want to connect to and follow the instruction from the step 4.
Available Wireless Network 
AAAAA
BBBBB
CCCCC
DDDDD
2Use ///to enter the SSID, then press
ENTER.
•/: Moves the adjusting digit.
•/: Changes displayed character.
•SOUND: Switches character types.
•CLEAR: Deletes one character at a time.
SSID
[SOUND] | Change Text |
[CLEAR] | Delete One Character |
Español Français English
31
En