12Changing the settings

3Use ///or number buttons to adjust the clock, then press ENTER.

The TIMER indicator lights and the wake-up timer has been set.

•Using / moves the adjusting digit (hour/minute/ AM, PM1).

•Using / increases or decreases values.

Timer Setting

7 0 AM

H:M:S AM/PM

Network setting

If a broadband router (with built-in DHCP server function) is connected to this unit, you can simply turn on the DHCP server function without having to set up the network manually. A broadband router without a DHCP server function connected to this unit must be set up as described below. Before you set up the network, consult with your ISP or the network manager for the required settings.

It is advised that you also refer to the operation manual supplied with your network component.

•Any changes made to a router without the DHCP server function must be reflected to unit network settings.

1 Press SET UP.

The Initial Setup screen is shown on the main display.

2Select Network Setting Network

Configuration.

3Use / to select Wired Setting or Wireless

Setting, then press ENTER.

•If you press RETURN, the previous screen will be displayed.

•The wake-up timer will turn on an input source at the volume level you selected when you set the timer.

Turning on/off the wake-up timer2

1 Press to turn on the timer.

The TIMER indicator lights.

• To turn off the timer, press during the timer is on.

Using the wake-up timer

1Set the wake-up timer to on.

2Press STANDBY/ON to turn the power off.

3At the wake-up time, this unit will turn on automatically and play the selected input function.

If this unit is not operated for 60 minutes or more after playback is started by the wake-up timer, power will automatically turn off (standby mode).

Using the sleep timer

The sleep timer switches off the unit after a specified time so you can fall asleep without worrying about it.

1Press SLEEP repeatedly to select a switch off time.

Choose between 5 min, 15 min, 30 min, 60 min, 90 min or Off.3

Network Configuration

Wired Setting

Wireless Setting

Next steps are described separately between Wired Setting and Wireless Setting. Follow the instructions of the appropriate network type.

Note

1The “AM” and “PM” indicators appear only when the Time Format is set to the 12H mode.

2Timer Setting need to be done before you turn on the timer.

3The sleep timer can be set by pressing SLEEP while the remaining time is displayed.

30

En