5 Printer Adjustments
7.Print Test Pieces
We recommend that you print a test piece every time you change any of the adjustments covered in this chapter.
1.Make sure your material conforms to our published speci- fications and that its loaded properly.
2.Turn the printer on and wait for the Printer Offline prompt to appear on the operator display.
3.Press the Test Print button on the printer control panel. The operator display prompts Test Printing Enter to Feed.
4.Press Enter. The envelope feeds and a sample address prints.
5.Press Enter again to stop printing.
6.Check print quality. If it is not satisfactory, you can make changes using the setup options available in the DA900 print driver. See Chapter 6.
If your material is not feeding reliably, check all setup ad- justments in this chapter, particularly the setting of the media thickness knob.
