CHAPTER 1: INTRODUCTION
ABOUT YOUR
INTEGRA™ 5
SCALE
Sleep Mode
SAFETY
PRECAUTIONS
The Integra™ 5 is a
The scale enters sleep mode if it remains inactive at zero weight for more than five minutes. In this state, the display clears and all information retained from the previous transaction clears.
Follow the normal safety precautions for all office equipment when using this scale.
❒Use only the AC adaptor/power supply included with this scale.
❒To protect against electric shock, plug the AC adaptor into a properly grounded wall outlet only.
❒The wall outlet should be near the scale and easily accessible.
❒Avoid using wall outlets controlled by wall switches or shared with other equipment.
❒Do not route the AC adaptor cable over sharp edges or trap it between furniture.
❒Do not remove covers; if the scale has been dropped or has otherwise had the enclosure stressed in any way, call Pitney Bowes at
❒Do not place lighted candles, cigarettes, cigars, etc., on the scale.
❒Use the equipment only for its intended purpose.
2