3.64 MB RAM minimum
4.20 MB of free disk space minimum
5.Ethernet Network Interface Card
2.2 Hardware Installation
This section describes how to connect and configure the
The DSL router may connect to a PC’s USB or Ethernet. DSL router will support at least one of connectivity methods. The preferred connectivity method is to use the Ethernet; if your PC does not support an Ethernet port, you will need to use the USB port and install additional software.
Note: Connect your DSL router to only one interface (Ethernet or USB).
Note: The USB driver supports Windows machines only.
Please connect the device to you computer as follow:
zIf connecting to the splitter, connect the “Line” splitter to wall jack using one telephone cable
zUse another telephone cable to connect “MODEM” port of the splitter and “LINE” port of the router. The “phone” port of the splitter can be use to connect the telephone by a telephone cable.
zUse Ethernet cable to connect “LAN” port of the router and “LAN” port of your computer.
If do not need to connect to the splitter,
zConnect the router to wall jack with a telephone cable.
zUse Ethernet cable to connect “LAN” port of the router and network adaptor of
10