Choose Add, Edit, or Remove to configure WAN interfaces.

Choose Save/Reboot to apply the changes and reboot the system.

Now we only show you how to add PVC.

3.5.1.1 Configure PPPoE

Click “Add” to add a certain piece of PVC. The following descriptions are given by an example of adding “PVC 8/35” (PPPOE mode).

Click “Add” following “PVC 8/35”.

In this interface, you can modify VPI/VCI, service categories, and QoS.

VPI (Virtual Path Identifier): The virtual path between two points in an ATM network, and its valid value is from 0 to 255.

VCI (Virtual Channel Identifier): The virtual channel between two points in an ATM network, ranging from 32 to 65535 (1 to 31 are reserved for known protocols).

Service Category: UBR Without PCR/UBR With PCR/CBR/Non Realtime VBR/Realtime VBR.

Enable Quality Of Service: enable/disable.

In this example, PVC 8/35 is required to modify, so service category and QoS will remain default values. In actual applications, you can modify them depending on your practices.

After proper modifications, click “Next” to show the following interface.

In this interface, you can modify Internet Connection Type and Encapsulation Type.

Change the connection type of PVC 8/35 to “PPP over ATM (PPPoE)”.

Select “PPP over ATM (PPPoE)”, and “LLC/SNAP-BRIDGING” (depending on the uplink equipment, generally “LLC/SNAP-BRIDGING”) as “Encapsulation Mode”.

26