Click “ENABLE Automatic Assigned Default Gateway” box to show the interface.

3.5.5.2 Routing – Static Route

In this interface, you can modify the Static Route settings.

Click “Static Route” to pop up an interface as shown in Fig. 3.5-47. In this interface, you can query the preset static routes, delete an existing static route, or add a new static route. By default, the system has no static route information.

Destination: The IP address where packets will go to.

Netmask: The subnet mask of the destination IP address.

Gateway: The gateway that the packets will pass by during transmission.

Interface: The interface that the packets pass through on the ROUTER.

Click “Add” to show the following interface.

44