3.5 Advanced Setup

Click “Advanced Setup” to enter the advanced system setup interface. By default, there are two options at the left side of the interface: “WAN”, “LAN”, etc. See the following interface.

If the ROUTER is configured to a routing mode, such as built-in PPPOE access, there will be more options at the left: “LAN”, “WAN”, “NAT”, “Security”, “Routing”, “DNS”, “DSL” and so on.

3.5.1 WAN

Click “WAN” to show the following interface. In this interface, you can modify and configure the WAN interface.

Note: After PVC is deleted or modified, the system must be rebooted, or the modification will not be effective.

25