
Click “Next”. In this interface, you can modify the WAN IP address, Default Gateway and DNS Server settings.
Obtain an IP address automatically: The ROUTER will obtain a (WAN) IP address automatically and at this time it will enable DHCP Client functions. The WAN IP address is obtained from the uplink equipment like BAS and the uplink equipment is required to enable the DHCP Server functions.
Use the following IP address: If you want to input the WAN ip address by yourself. Check this entry and then input related data in the field.
WAN IP Address: Input the IP address of the WAN interface provided by your ISP.
WAN Subnet Mask: Input the subnet mask concerned to the IP address of the WAN interface provided by your ISP.
Obtain Default Gateway automatically: To obtain the IP address of the default gateway assigned by the uplink equipment such as BAS.
Use the following Default Gateway: If you want to input the IP address of the default gateway by yourself, click this entry and then input related data in the fields.
Use IP Address: Input the gateway of the WAN interface provided by your ISP.
Use WAN Interface: As to BAS equipment, it is the IP address of the downlink interface.
Obtain DNS server address automatically: To obtain the IP address of the DNS server assigned by the uplink equipment such as BAS.
Use the following DNS server address: If you want to input the IP address of the DNS server by yourself, click this entry and then input related data in the fields.
Primary DNS server: Input the IP address of the primary DNS server here.
Secondary DNS server: Input the IP address of the secondary DNS server provided by your ISP here.
32