If you select “Remote” or “Both”, all events will be transmitted to the specified UDP port of the specified log server.
After operations under “Configure System Log”, click “View System Log” to query the system logs. In this example, the “View System Log” is a system default one.
Note: The log and display of the system events are above the set level. If you intend to record all information, you need to set the levels as “Debugging”.
Click “Refresh” to refresh the system event logs or “Close” to exit from this interface.
3.7.3 Internet Time
Click the “Internet Time”, the interface show you. In this page, the ROUTER can synchronize with Internet time servers.
After enable “Automatically synchronize with Internet time servers”, the interface shows below. Enter proper configurations, and then click “Save/Apply”.
3.7.4 Access Control
3.7.4.1 Access Control – Services
Click “Access
50