5.2Surface mount

1.Before installation starts, put mounting base and plastic housing together to make a base module

2.Locate the base module onto the place the camera is to be mounted, and fix the base on the surface completely with screws through the 3 holes on the base (be sure the cables are well located throughout the cable outlet)

3.Get the camera and plug it onto the base; watch for the direction of the connectors on camera and mounting base and be sure they are mated well. Then rotate the camera body counter-clockwise until it is completely locked

4.Put the safety screw (anti-loss)in locking position and screw it in

Integrate the mounting base and the

Mounting the module to the surface

plastic housing as a module

 

Fit the camera into the module and Put the safety screw in place lock it in position

In case of dealing with a concrete surface:

a.Mark the locations for screw through the holes on the base

b.Make holes on the wall, then insert the supplied plastic plugs into the holes and squeeze them in until they are flush with the wall surface.

c.Mount the base on the desired place tightly with screws

.

.

User’s manual

18