2.With outdoor housing, AC24V:

An AC adapter of 24V / 1.66A is supplied with the outdoor housing (CAM-OH) for the AC version. To power the camera, connect adapter to camera’s power connector.

Power Connector on Speed Dome

AC 24V Connector on Adaptor

As soon as power is supplied, the speed dome will enter “initial check” mode with the following procedures:

„Move the lens automatically for system check

„Screen comes up with blue picture and will be showing “starting” in white for around 3 seconds

„Then the camera will show normal image and get ready for control

6.2 Video

Video output level of the camera, in standard of 1Vp-p, is delivered with female BNC connector at 75 ohms impedance. To transmit the video to receiver properly, it is recommended to use RG-59 A/U coaxial cable with stranded center conductor, with male BNC connectors on both ends.

RG-59 is also in 75 ohm impedance, which matches the camera’s output impedance. The A/U version is recommended, rather than the version B/U, due of its superior performance on flexibility for resisting severe twisting, bending and other stresses which occur in many CCTV installations.

In case the installation distance is over than 500 meters (1,500 feet), additional amplifier might be needed to keep the video level and image quality.

.

.

User’s manual

27