5.3 Embed Camera Into Ceiling

Step 1 make holes

To insert the speed dome into the ceiling, first a hole must be properly made to let the dome be through for hanging.

The best way to decide the diameter of the hole, and the spots for mounting screws, is to use the supplied metal holder.

„Put the holder on the surface of the target location and mark a circle with pencil or color marker

„Also mark out the spots for screws with the screw holes on the holder

„Cut the camera hole alone with the curve

„Drill holes for screw in 6 mm (1/4”) on the three marked spots;

Step 2 Integrate the decoration ring with camera

The decoration ring is not just for nice looking, but also the piece to hold the camera in place for embedded mounting.

To integrate the ring to camera:

1.Take the transparent dome cover off

2.Locate the ring to the bottom side of the cover

3.Put the cover back to the camera

Step 3 Mount the camera through the hole

Take the below steps to make the camera cling to ceiling:

1.Place the auxiliary metal bracket onto the top of the ceiling

2.Put the camera through out the hole

3.Align the screw holes of the decoration ring and the auxiliary bracket

4.Put screws through and tighten the two brackets, with the ceiling in between

.

.

User’s manual

19