4.2 DIP switches
Overview of DIP switches
There are three sets of DIP switch on board for different setup purposes.
| location # |
|
|
| bit quantity |
|
|
| used for |
|
| DS1 |
| 8 |
|
|
| Protocol / baud rate setup | |||
| DS2 |
| 8 |
|
|
| Device ID setup | |||
| DS3 |
| 2 |
|
|
| Network impedance | |||
Refer to the picture on below for DIP switch locations.
DS3 
DS1 
DS2
In the following paragraphs are the detail descriptions of the three main setups the installer must do, before hardware mounting and cabling work should begin.
. | . |
User’s manual | 8 |