Polaris 550 EPS owner manual Backrest Adjustment Latch Passenger

FEATURES AND CONTROLS

Passenger Seat

Seat Conversion

5.Lift the adjustment latch at the top of the passenger backrest. Raise the backrest to the desired position. Release the latch, making sure it locks into one of the three operating positions.

Tip: The backrest must be moved out of the lowest position before it can be secured in the upright position. The lowest position is for seat storage only. Do not leave the backrest in the lowest position. Always adjust the backrest to one of the three operating positions.

6.Lower the operator backrest to create the passenger seat. Two retaining pins under the seat should fit into the two grommets on the seat base.

Backrest Adjustment Latch

Passenger

7. Test the passenger seat

lock-out by attempting to release the cargo box dump latch. See page 77. If the

dump latch releases, the seat is not secure. Repeat the set-up procedure. If the lock-out is not working properly, do not allow a

passenger to ride the vehicle. See your POLARIS dealer for service.

8. To return the vehicle to single-rider
operation, reverse all steps. Always	Locked
lower the passenger backrest to the
lowest position before folding it
down into the cargo box. Slide the
seat latch levers outward to secure the
locks.

42