Engine Oil

Oil and Filter Change

9.Place shop towels beneath the oil filter. Using an oil filter wrench (available from your POLARIS dealer), turn the filter counter-clockwise to remove it.

10.Using a clean dry cloth, clean the filter sealing surface on the crankcase.

11.Lubricate the o-ring on the new filter with a film of fresh engine oil. Check to make sure the o-ring is in good condition.

12.Install the new filter and rotate it clockwise by hand until the filter gasket contacts the sealing surface, then turn it an additional 1/2 turn.

13.Remove the dipstick. Add the proper amount of the recommended oil. Do not overfill.

14.Reinstall the dipstick.

15.Place the transmission in PARK.

16.Lock the parking brake.

MAINTENANCE

Oil Filter

17.Start the engine. Allow it to idle for one to two minutes.

18.Stop the engine.

19.Check for leaks.

20.Check the oil level. Add oil as needed to bring the level to the upper mark on the dipstick.

21.Dispose of used filter and oil properly.

99

Page 101
Image 101
Polaris 550 EPS owner manual Oil Filter