Polaroid • Settings
3.9 Alias Settings
Figure 8.2
You may assign your camera (or cameras) any name(s) you choose by entering in the Alias box.
3.10 Date & Time Settings
Figure 8.3
Figure 8.4
Set time and date for your camera. Make sure you’re put in the ClockTime Zone for your country.You can choose to Sync with NTP Server (fig. 8.3) or Sync with PCTime (figure 8.4)
3.11 User Settings
You can have up to eight users on the Polaroid IP camera system.You can set up users names, passwords.The users can be listed as Visitors, Administrators, or Operators. Each is assigned a level of authority and permission to have access to the system with different levels of access. For example:
Polaroid • Settings
Visitor: See figure 2.7 details of usage at this level.
Operator:You can control the direction of the IP Camera and set parameters.
Administrator:You can set up advanced configurations of the IP Camera. (See 3.1.22)
Figure 8.5
3.12 PT Settings
Figure 8.6
1.Go center on boot. Automatically rotates camera at start.
2.PT (Pan/Tilt) Speed. Set Pan/Tilt Speed.
3.Upward patrol speed. Set cruising speed upward
4.Downward patrol speed. Set cruising speed downward.
5.Left patrol speed. Set cruising speed to left.
6.Rightward patrol speed. Set cruising to right.
NOTE: Value 0 is fastest speed. Value 10 is slowest. Recommended speed is 5.
44 | IP300 Manual | 45 |
| ||
|
|
|
