Polaroid • Settings | Polaroid • Settings |
Enter Alarm Service Settings Page to set alarm to your specifications.
3.18.1 Motion Detection Armed
When you enable Motion Detection Armed, the camera will sound an alarm when motion is detected and it will record the incident.
Figure 9.7
Should motion be detected, the Alarm Status will automatically switch to Alarm Detect Alarm.
Figure 9.8
3.18.2 Motion Detection Sensitivity.
You may choose up to 10 settings of sensitivity for motion, 10 being the most sensitive. See figure below:
Figure 9.9
3.18.3 Alarm Input Armed/ IO Linkage on Alarm
In the event that you want to connect external alarm devices to ward off or frighten intruders, you must choose Alarm Input Armed to enable an input device. For an output device, you must choose IO Linkage on Alarm.
Figure 10.0
In figure 10.0 you will notice a trigger box.There are two trigger level options you can set.
52 | IP300 Manual | 53 |
| ||
|
|
|
