Polk Audio DP-1 manual DR-3 Remote Guided Tour, These buttons serve two

DR-3 REMOTE GUIDED TOUR

We will only describe here the DR-3 remote functions as they pertain to the Polk Audio Digital Solution preamp/processor and DP-1 CD/DVD player. See the separate DR-3 Owner’s Manual for instructions on how to program and use this remote for other devices.

1.	These buttons serve two
	functions: to select the device

that the remote will control and to change inputs on the Digital Solution preamp/

processor. For example if you want to play the DVD player, push the “DVD” button on the top row. The Digital Solution preamp/ processor will switch to the DVD input and the buttons on the DR-3 remote will be set to operate the DP-1 CD/DVD player.

The top buttons bordered by the gold box are multi-function buttons. That is, they can select more than one input. Press the DVD/6CH button once and it selects the DVD input on the pre- amp/processor and allows the DR-3 to act as the remote for the DP-1 CD/DVD player. Press it a second time and the DS preamp switches to the 6CH Analog input for a DVD-Audio or multi-chan- nel SACD player. What these buttons can’t do is select more than one set of remote codes. You can program ONE device per Source button. Don’t worry it isn’t very likely that you are going to have both a digital and an analog cable tuner or two DVD players hooked up to your system. Of course before the DR-3 can operate any device other than the DS preamp/processor and DP-1 CD/DVD player, you have to insert the device’s remote codes into the DR-3. (See the separate DR-3 Owner’s Manual for instruc- tions on how to program and use this remote for other devices.)

IMPORTANT NOTE: The VOL , SURROUND MODE, MUTE, SUB+ and SUB– buttons are permanently assigned to Digital Solution preamp/processor functions. No matter what other device you have selected on the DR-3 remote, you can always adjust the DS system volume, subwoofer level, mute and surround mode functions.

To switch the DR-3 remote to operate the Digital Solution’s radio tuner, push the FM/AM button.

2. The Macro button allows you to program a string of remote commands to accomplish with one push of a button a series of operations that would normally take several button pushes. We strongly recommend that you set the MACRO to turn on and off the Digital Solution system and DP-1 player together. Let’s do that now, shall we?

1.Press and hold the CODE button within the bordered “program” button group until the status light at the top left of the remote glows red.

2.Press the DVD Source/Device button. The DVD button will light up.

3.Press the MACRO button. The status light and the DVD Source/Device button will blink once.

4.Press the System Power button.

5.Press the DVD source button at the top of the remote.

6.Press the red Source power button at the bottom left of the remote.

7.Press the SAVE button to store the commands. The red status light and the DVD Source button lights will blink twice and then turn off to confirm the program.

The Macro button can be used to do a lot of other convenient and nifty things. See the separate DR-3 remote Owner’s Manual for full Macro programming instructions.

3. Back lights the remote buttons for 8 seconds so you can operate the remote in the dark. The function of this button does not change when you enter program codes for other devices.

4. Mutes the sound of the Digital Solution system. To disen- gage the mute function and go back to normal playback volume, press the MUTE button again or press either of the VOLUME but- tons. The function of this button does not change when you enter program codes for other devices.

5. This button toggles between the various audio modes of the Digital Solution system such as stereo, Dolby Pro-Logic, 5 Channel Surround, etc. The function of this button does not change when you enter program codes for other devices.

6.These buttons control the volume of the Digital

Solution system. The function of these buttons does not change when you enter program codes for other devices.

7.With the Digital Solution system these buttons

step through the preset radio stations just like the Radio Preset +/- rocker buttons on the DR-2 remote.

8.This button acts as a chapter skip button to move

you quickly back from the current DVD chapter to the previous chapter or to skip backwards from track to track on a CD.

9.This button acts as a chapter skip button to move

	you quickly forward DVD chapters or to skip forward
	from track to track on a CD.
10.	This button acts as the pause/step frame

button for the DP-1 CD/DVD player. To return to normal play, press the PLAY button. When the MULTI source/device button gets pressed, enabling multi-zone remote speaker use with the DS System, this button acts as the up arrow navigation for the on-screen display for the Digital Solution pre- amp/processor.

11.Each time you depress this button, the Polk

DP-1 plays in reverse a little faster. The first push plays the disc backwards at 2X normal speed. The second push of the button increases the

reverse play speed to 4X normal speed and so on to a maximum of 100X normal speed. To resume normal playing direction and speed press the ENTER button. When the MULTI source/device button gets pressed, enabling multi-zone remote speaker use with the DS System, this button acts as the left arrow navigation for the on screen display of the Digital Solution preamp/processor.

Polk Customer Service (800) 377-7655 7