User’s Guide for the Polycom Mobile Responder
Restoring System Settings
If you reset the VSX 8000 to the factory defaults and delete the system settings, follow these steps to restore the system settings for the Mobile Responder:
1.Press and hold down the button on the remote control while
powering on the Mobile Responder. Hold the | button until the |
Polycom logo appears on the screen. |
|
2.Use the remote control to select a language, and then follow the remaining screens in the setup wizard.
3.Set these camera settings:
On this VSX 8000 |
|
| |
screen... | Set this field... | To this setting... | |
|
|
| |
System > Admin Settings | Primary Camera | 2 | |
> Cameras |
|
| |
|
|
| |
System > Admin Settings | Camera 1 Source | ||
> Cameras (page 2) |
|
| |
Camera 2 Source | Composite | ||
| |||
|
|
| |
|
| People | |
|
|
|
4.Set these audio settings:
On this VSX 8000 |
|
| |
screen... | Set this field... | To this setting... | |
|
|
| |
System > Admin Settings | Input Type | Microphone | |
> Audio (page 2) |
|
| |
Level | 10 | ||
| |||
|
|
| |
| Echo canceller | Enabled | |
|
|
| |
| Enable Phantom | Disabled | |
| Power |
| |
|
|
|
2 - 10
