POSIFLEX Business Machines PP3000 Reference Epson Models Emulated, Character Size/Font Matrices

TM

Reference Epson Models Emulated

EPSON TM-300 series.

Character Size/Font Matrices

Refer to page 5 - 4, the 8 CPI character size (5 x 9 pulse 3 full dot mode) is not applicable for EPSON emulation.

Unsupported Control Codes:

Following EPSON control codes are not supported in PP-300E series due to hardware difference:

Control Codes	Function
ESC <	Return home
ESC c 3	Select paper sensor(s) for “paper-out” output signal
ESC c 4	Select paper sensor(s) to stop printing
ESC i	Partial cut (leave 1 point)
ESC m	Partial cut (leave 3 points)
ESC r	Select print color

Supported Control Codes:

NOTES:

•Default character spacing for 7 x 9 font is 3 dots, for 5 x 9 is 2 dots. These values are the minimum settings. In 5 x 9 font, no odd number spacing is allowed, or it will be automatically decreased.

‚Font select: 1⇒ 7 x 9; 0⇒ 5 x 9.

ƒ7 x 9 font is recommended in defining user-define characters. When original 9 x 9 characters are downloaded under 5 x 9 font printing mode, the characters will be automatically transferred to 5 x 9 by removing the half-dot bits.

„Internatioal character n in hex code:

<00>⇒USA,<01>⇒France,<02>⇒Germany,

<03>⇒England, <04>⇒Denmark,<05>⇒Sweden,

<06>⇒Italy,	<07>⇒Spain,	<08>⇒Japan,
<09>⇒Norway,	<0A>⇒Denmark II,	<0B>⇒Croatia.
… Character table n in hex code:
<00>⇒USA&Europe,	<01>⇒IBM 1,	<02>⇒IBM 2,
<03>⇒JAPAN.

CHAP. 7

CONTR…

7 - 5