DETAIL DESCRIPTION : STX-ETX mode is set.
CODES (HEX/CONTROL) : 03 / <ETX>
FUNCTION : Terminate STX-ETX mode
APPLICATION LIMIT : This code is valid when using serial interface printer. When IBM character set #2 is selected by character code, the code <ETX> does not exist (In this instance, select another code).
DETAIL DESCRIPTION : Terminates the STX-ETX mode and prints out the text data.
CODES (HEX/CONTROL) : 05 / <ENQ>
FUNCTION : Enquiry
APPLICATION LIMIT : This code is valid when using serial interface printer. When IBM character set #2 is selected by character code, the code <ENQ> does not exist (In this instance, select another code).
DETAIL DESCRIPTION : Causes printer to transmit status byte (not in STX-ETX mode). When this code is received after receiving text data in the STX-ETX mode, the printer transmits the status and check byte.
A - 1
Enter STX-ETX mode
(HEX/CONTROL) : 02 / <STX>
CODES FUNCTION :
APPLICATION LIMIT : This code is valid when using serial interface printer. When IBM character set #2 is selected by character code, the code <ETX> does not exist (In this instance, select another code).
APPENDIX A
STAR COMPATIBLE MODE COMMAND DETAIL
(All commands are listed in hexadecimal code sequence)
TM
