POSIFLEX Business Machines PP3000 manual Parallel Interface Switch, DIP-SW1

TM

a)When DIP SW4-1 through 4-4 are all ON (DC1/DC3 invalid mode) DC1 and DC3 codes are invalid.

b)When DIP SW4-1 through 4-4 are OFF (DC1/DC3 valid mode) DC1: Select

DC3: Deselect

When the printer receives the DC3 code, it throws away data until it receives the DC1 code. (all the data between the DC3 and DC1 code)

DTR is always ready.

c)Other settings (addressable mode) DC1 n: selects n (address)

DC3: Deselect

When the printer receives the DC3 code, it throws away data until it receives the DC1 n code (with the n matching the printer’s own address).

DTR is always ready.

Note : DIP sw1-4 select the select/deselect state for the printer when the power is first switched on.

CHAP. 4

TECHN…

Parallel Interface Switch

DIP-SW1

Switch	Function	ON	OFF
1-1
1-2	Not used
1-3	Control code CR	Invalid	Valid
1-4	Not used
1-5	Setting the paper feed length	1/6 - inch	1/8 - inch
1-6	Setting the buffer size	4 K-bytes	256 bytes
1-7	Not used
1-8	Paper out detection function	Valid	Invalid

4 - 7