Powermatic PJ-882HH operating instructions Table of Contents

Table of Contents
Warranty and Service	2
Table of Contents	3
Warning	5
Introduction	7
Description	7
Specifications	7
Unpacking	8
Contents of the Shipping Container	8
Installation and Assembly	9
Installing Switch Arm	10
Installing Cutterhead Guard	10
Dust Collection	11
Grounding Instructions	11
Extension cords	12
230 Volt, Single Phase Operation	12
Three Phase Operation	12
Adjustments	13
Drive Belt Tension	13
Drive Belt Replacement	13
Fence Movement	14
Fence Stops	15
Fence Removal	16
Locking Handles	16
Table and Knife Adjustments	16
Setting Tables Coplanar	17
Setting Knives at Correct Height and Parallel To Outfeed Table	19
Outfeed Table Stop Screws	22
Setting Infeed Table (Depth of Cut)	22
Infeed Table Depth Stop	22
Infeed Table Stop Screws	22
Replacing Knives (Straight Cutterhead Only)	23
Replacing or Rotating Knife Inserts (Helical Cutterhead Only)	24
Eliminating “Play” in Tables	24
Operating Controls	25
Start/Stop	25
Safety Key	25
Hand Placement	26
Surfacing	26
Edge Jointing	26
Rabbeting	26
Jointing Short or Thin Work	27
Jointing Warped Surfaces	27
Beveling	27
Direction of Grain	27
Skewing (Shear Cutting)	27
Maintenance	28
Sharpening Standard Knives	29
Cutterhead Repairs	29
Operation	25
Optional Accessories	32
Replacement Parts	32
Parts List: Stand Assembly	33
Stand Assembly	35
Parts List: Cutterhead Assembly (Model PJ-882 only)	36
Parts List: Cutterhead Assembly (Model PJ-882HH only)	37
Parts List: Fence Assembly	38
Fence Assembly	39

3