C O M M E R C I A L P R O D U C T S D I V I S I O N
KEYS ON THE DISPLAY CONSOLE
The Precor treadmills have an
Each key on the display console’s keypad provides specific functions. Numeric keys (numbered 1 - 0) let you enter data in answer to the display prompts and change the speed or incline during a workout.The standard keys, Change, Reset, Incline ▲▼, Speed Control ▼▲, and Enter, let you enter data as well as control your workout.
The following information explains the different uses of the keys from left to right. To locate each key, look at the display console or refer to Diagram 22.
Diagram 22 Display console keypad. | Numeric keys: Indicate course #, |
| time limit, or goal entries. During |
| a workout, use these keys to |
| select a target Speed or Incline. |
QuickStart: Bypasses the remaining Setup prompts and starts moving the running belt. SmartRate® is inactive and default values apply.
Note: The CHANGE keys are not shown in this diagram. Refer to Diagram 21.
KEYPAD TIPS
•Select accurate entries or features such as SmartRate® will not work properly.
•Answer the Setup prompts by pressing the numeric keys or the ▼ or ▲ keys.
•Press Enter to select the information being displayed.
•QuickStart bypasses further selections and causes the running belt to start moving. Default values apply (see QUICKSTART on page 30).The SmartRate® display does not blink or flash, or give any indication of the zone that you are in.
•A
•Press Reset to return to the Precor banner.
•The Stop key does not appear in Diagram 22, but its function is vital as explained in this section.
page 29
