34 | Operating and Maintaining the P80 Console |
Editing the Export/Import Channel File
Note: You will need to scan for channels before you can export the file. If you have not scanned for channels, refer to Channel Configurations in the preceding section.
Exporting the channel list from the fitness equipment creates a file called
To export this file from your console:
1.Enter your code to view System Settings. To locate your code, refer to Configuring the System Settings.
2.Insert a USB drive into the console.
3.On the Settings menu, touch System Settings.
4.On the System Settings menu, touch TV Settings, then Export/Import Channel Names.
5.When the box is lit, touch Export to USB. The
6.Touch OK to return to the System Settings menu.
7.Touch Back twice to return to the Welcome screen.
Important: You must return to the Welcome screen before you remove the USB drive.
8.Remove the USB drive from the console and insert it into your computer.
To edit the file and reload it:
Note: You will need a
1.Using the editor, open the
Important: Do not add or delete any channels from this list. This must only be done through Deleting a Channel.
2.Save the file using the same name and extension. Be sure it is in the /precor folder, and close the editor. This prevents read or write errors to the USB drive.
3.Remove the USB drive from your computer and reinsert it into the same console you used for your initial export.
4.Enter your code to view the System Settings.
