![](/images/new-backgrounds/1169819/16981977x1.webp)
Disc Output Location
Do not change this setting! It should be left in the Kiosk mode setting.
Enable Bi-di Printing
When enabled the Bravo will print bi-directional for faster printing. The default is uni-directional printing. When you enable bi-directional printing, you should perform the Alignment Calibration described later in this section. Please note that the calibration is stored on your computer, so if you move to a new computer you must repeat the calibration.
Alignment Calibration
The Alignment Calibration allows you you create a test print that will provide you with values to configure your printer for Bi-Di- Printing and to align the color and black cartridges for Color+Black printing. If Bi-Di Printing is enabled, or if you use Color+Black as a cartridge type in the driver settings, it is important to perform this calibration every time you change a cartridge. To print, click the Alignment Calibration Properties button then click Yes.. The print will look like this:
| 0 | 4 | 8 | 12 |
A | 1 | 5 | 9 | 13 |
| 2 | 6 | 10 | 14 |
| 3 | 7 | 11 | 15 |
B
C
0 2 4 6 8 10 12 14
D
Administrator Utility and Advanced Functions 35