TOC | INDEX |
When the job starts the Status window will appear. Here you can view the status of the printer, the robot, and the drive. You can also view a log of all activity or cancel the job while its in progress.
B. USING PTPUBLISHER
The PTPublisher program is divided into six areas. Refer to the following for a description of each area.
1. Open Project Panel
This panel allows you to open a previously saved project. It will also display the last few saved projects. To open or close
this or any panel click on the down or up arrow 
on the upper right corner of the panel.
2. New Project Panel
This panel allows you to create any of the project types available for this robot. Click on the category to open specific project types. This panel is your starting point for any new project.
3. Current Projects Panel
This panel displays any project that is running or open. Once you save your project the project name will be displayed here. Click on the project name to open it.
16Sending Jobs to the XRn
