Printek Emulation
Print Single Character | ESC \ n |
Prints the character n from the selected font. This sequence may be used to print a character that is normally treated as a control code.
Example: The following escape sequence will print a left arrow, if a Proprinter font is selected. This character is normally not printable, since it is treated as the ESC control code.
Escape Sequence: | ESC | \ | ESC |
Hexadecimal: | 1B | 5C | 1B |
Line Pitch
Set Line Spacing to n/288"ESC LF n
Sets the line spacing to n/288 of an inch per line. 0³n³255. Overrides the "LPI:" value in the "Setup: FORM" menu.
Example: The following escape sequence will set line spacing to 1/6 of an inch per line (6 lpi).
Escape Sequence: | ESC | LF | 48 |
Hexadecimal: | 1B | 0A | 30 |
Page