|
|
| Epson FX Emulation |
Escape Sequence: | ESC | t | 0 |
Hexadecimal: | 1B | 74 | 30 |
Enable Printing of High Symbols | ESC 6 | ||
Enables printing of character values 128 through 159 decimal. If printing is not enabled, these characters will be treated as control codes. Overrides the "Chars:" value in the "Setup: INTERFACE" menu.
Escape Sequence: | ESC | 6 |
|
Hexadecimal: | 1B | 36 |
|
Disable Printing of High Symbols | ESC 7 | ||
Disables printing of character values 128 through 159 decimal. These characters will be treated as control codes. Overrides the "Chars:" value in the "Setup: INTERFACE" menu.
Escape Sequence: | ESC | 7 |
Hexadecimal: | 1B | 37 |
Printing of Low Symbols | ESC I n | |
Enables printing of character values 0 through 31 decimal if they are not used as control codes for n=1, or disables printing for n=0. Overrides the "Chars:" value in the "Setup: INTERFACE" menu.
Example: The following escape sequence will disable printing of character values 0 through 31 decimal.
Escape Sequence: | ESC | I | 0 |
Hexadecimal: | 1B | 49 | 30 |
Page
