Printek 4503, 4300, 4500 Line Pitch, Select 8 LPI, Set Line Spacing to 7/72, Select 6 LPI, ESC 3 n

Epson FX Emulation

Line Pitch

Select 8 LPI ESC 0

Sets the line spacing to 1/8 of an inch per line (8 lpi). Overrides the "LPI:" value in the "Setup: FORM" menu.

Escape Sequence:	ESC	0
Hexadecimal:	1B	30
Set Line Spacing to 7/72"		ESC 1

Sets the line spacing to 7/72 of an inch per line. Since the distance between print head wires is 1/72 of an inch, this is equivalent to setting seven wire spacing. This is not particularly useful for text, but may be useful for graphics if 7-bit graphics data is being sent. Overrides the "LPI:" value in the "Setup: FORM" menu.

Escape Sequence:	ESC	1
Hexadecimal:	1B	31
Select 6 LPI		ESC 2

Sets the line spacing to 1/6 of an inch per line (6 lpi). This is the normal text line spacing. Overrides the "LPI:" value in the "Setup: FORM" menu.

Escape Sequence:	ESC	2
Hexadecimal:	1B	32
Set Line Spacing to n/216"		ESC 3 n

Sets the line spacing to n/216 of an inch per line. 0³n³255. Overrides the "LPI:" value in the "Setup: FORM" menu.

NOTE: The actual resolution of the FormsPro 4000 paper stepper motor is 1/288 of an inch. When spacing is specified in 1/216 of an inch, the printer will actually move paper to the nearest 1/288 of an inch.

Example: The following escape sequence will set line spacing to one half inch.

Escape Sequence:	ESC	3	108
Hexadecimal:	1B	33	6C

Page 3-14