| ANSI X3.64 Emulation |
Vertical Position |
|
Line Feed | LF |
(or) | IND |
(or) | ESC D |
Causes the current line to be printed, and then advances the paper one line at the current line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE" menu, a carriage return will also be performed.
Control code: | LF |
|
Hexadecimal: | 0A |
|
Control code: | IND |
|
Hexadecimal: | 84 |
|
Escape Sequence: | ESC | D |
Hexadecimal: | 1B | 44 |
Partial Line Down |
| PLD |
(or) |
| ESC K |
Performs a half line feed. Causes the current line to be printed, and then advances the paper one half line at the current line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE" menu, a carriage return will also be performed.
Control code: | PLD |
|
Hexadecimal: | 8B |
|
Escape Sequence: | ESC | K |
Hexadecimal: | 1B | 4B |
Partial Line Up |
| PLU |
(or) |
| ESC L |
Performs a reverse half line feed. Causes the current line to be printed, and then retracts the paper one half line at the current line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE" menu, a carriage return will also be performed.
Control code: | PLU |
|
Hexadecimal: | 8C |
|
Escape Sequence: | ESC | L |
Hexadecimal: | 1B | 4C |
Page