GLOSSARY
ANSI | American National Standards Institute. |
ASCII | American Standard Code for Information Interchange. |
baud rate | The rate at which characters are transmitted over a serial |
| interface. This is usually the same as bits per second. |
binary | Base two numbering system. Digits are represented by the |
| characters 0 and 1. |
bit | A single binary digit. |
control code | A single, |
| the configuration or operation of the printer. |
character pitch | The horizontal spacing of characters. Measured in cpi. |
cpi | Characters per inch. |
cps | Characters per second. |
current line | The line upon which the next character will be printed. |
current print position | The column on the current line where the next character |
| will be printed. |
default | Value or configuration assumed when the printer is |
| powered on or reset. |
dpi | Dots per inch. Generally used to refer to graphics density |
| or resolution. |
draft | Refers to the draft (high speed) font. |
EBCDIC | Extended Binary Coded Decimal Interchange Code. |
escape sequence | String of characters beginning with the escape (ESC) |
| character which is used to control the configuration or |
| operation of the printer. The characters which are part of |
| this string are not printed. |
