HEX DUMP MODE
Hex dump mode provides a way to print, in a readable form, all the data received by the printer. This tool is useful to programmers for diagnosing problems with control codes and escape sequences sent to the printer. Hex dump mode may also be used to detect what commands are being sent by a particular software application to help determine which emulation mode is needed for that application.
To select hex dump mode, specify the value "Mode: Hex Dump" in the "Setup: INTERFACE" menu. Be sure to note the emulation currently being used before changing it to "Hex Dump".
A sample hex dump is shown below. Note that each line shows sixteen characters, first in hexadecimal format, then in printable ASCII format. All unprintable ASCII characters (printable characters are from 21 hex to 7E hex inclusive) are represented by a period.
54686973 | 20697320 | 61207361 | 6D706C65 | This.is.a.sample |
20686578 | 2064756D | 7020746F | 20696C6C | .hex.dump.to.ill |
75737472 | 61746520 | 68657820 | 64756D70 | ustrate.hex.dump |
666F726D 61740D0A |
|
| format.. | |
When the printer is executing in hex dump mode, control characters and escape sequences sent to the printer are not recognized or processed. The hexadecimal representation of the control characters and escape sequences will appear in the hex dump, but no other special processing will occur.
In particular, note that ETX/ACK handshake will not operate properly in hex dump mode. When an ETX is received by the printer, its hexadecimal representation will be printed in the hex dump, but no ACK will be sent to the host computer. When using the printer in hex dump mode, it is recommended that the printer be configured for parallel I/O, serial I/O with hardware handshake, or serial I/O with XON/XOFF handshake.
To exit hex dump mode, restore the previous "Mode:" value in the "Setup: INTERFACE" menu.
Page
