| DEC LA120 Emulation |
Vertical Position |
|
Line Feed | LF |
(or) | IND |
(or) | ESC D |
Causes the current line to be printed, and then advances the paper one line at the current line spacing. If "Auto CR: On" is selected in the "Setup: INTERFACE" menu, a carriage return will also be performed.
Control code: | LF |
|
Hexadecimal: | 0A |
|
Control code: | IND |
|
Hexadecimal: | 84 |
|
Escape Sequence: | ESC | D |
Hexadecimal: | 1B | 44 |
Absolute Vertical Tab |
| ESC [ n d |
Sets the current line to line n of the current form. The actual position will depend on the current line spacing.
Example: The following escape sequence will set the active line to line 12.
Escape Sequence: | ESC | [ | 1 | 2 | d |
Hexadecimal: | 1B | 5B | 31 | 32 | 64 |
Relative Vertical Tab |
|
|
|
| ESC [ n e |
Advances the active line by n lines. The actual distance moved will depend on the current line spacing. Equivalent to sending n line feeds (LF).
Example: The following escape sequence will advance the active line by 12 lines. If current line spacing is 6 lpi, this will cause the paper to advance one inch.
Escape Sequence: | ESC | [ | 1 | 2 | e |
Hexadecimal: | 1B | 5B | 31 | 32 | 65 |
Page