Printek Emulation
m DPI Graphics | ESC * m n1 n2 data |
Selects eight wire graphics of density m as listed in the following table for n2 + (n1 x 256) columns of data.
m |
| Density | _ |
6240 dpi
7240 dpi high speed
8180 dpi
9180 dpi high speed
10144 dpi
11144 dpi high speed
12120 dpi
13120 dpi high speed
14102.86 dpi
15102.86 dpi high speed
1690 dpi
1790 dpi high speed
1880 dpi
1980 dpi high speed
2072 dpi
2172 dpi high speed
2265.45 dpi
2365.45 dpi high speed
2460 dpi
2560 dpi high speed
NOTE: Horizontal movement of the FormsPro 4000 print head is measured in intervals of 1/720 of an inch. Every supported graphics density above is an integral multiple of this resolution. For example, at 60 dpi, dots may be printed every 12/720 of an inch.
Example: The following escape sequence will print four bytes of graphics data at 72 x 72 dpi. The resulting figure will resemble a square, since the horizontal and vertical density are the same. If some other density is chosen, the figure will resemble a rectangle.
Escape Sequence: | ESC | * | 20 | 0 | 4 | < | < | < | < |
Hexadecimal: | 1B | 2A | 14 | 00 | 04 | 3C | 3C | 3C | 3C |
Page
