Printek 4503, 4300 Line Pitch, Select Print Mode, ESC I n, Select 8 LPI, Set Line Spacing to 7/72

IBM Proprinter Emulation

Select Print Mode ESC I n

Selects print mode n according to the following chart. Overrides the "Font:" value in the "Setup: FORM" menu.

nPrint Mode

0Draft

1Draft 12 cpi

2Letter Quality

3Letter Quality

Example: The following escape sequence will select the IBM Proprinter letter quality font.

Escape Sequence:	ESC	I	3
Hexadecimal:	1B	49	03

Line Pitch

Select 8 LPI ESC 0

Sets the line spacing to 1/8 of an inch per line (8 lpi). Overrides the "LPI:" value in the "Setup: FORM" menu.

Escape Sequence:	ESC	0
Hexadecimal:	1B	30
Set Line Spacing to 7/72"		ESC 1

Sets the line spacing to 7/72 of an inch per line. Since the distance between print head wires is 1/72 of an inch, this is equivalent to setting seven wire spacing. This is not particularly useful for text, but may be useful for graphics if 7-bit graphics data is being sent. Overrides the "LPI:" value in the "Setup: FORM" menu.

Escape Sequence:	ESC	1
Hexadecimal:	1B	31
Start Line Spacing		ESC 2

Sets the line spacing to the value selected by ESC A n. Overrides the "LPI:" value in the "Setup: FORM" menu.

Escape Sequence:	ESC	2
Hexadecimal:	1B	32

Page 4-9