Epson FX Emulation
Set Line Spacing to n/72" | ESC A n |
Sets the line spacing to n/72 of an inch per line. 0³n³255. Since the distance between print head wires is 1/72 of an inch, this is equivalent to setting n wire spacing. Overrides the "LPI:" value in the "Setup: FORM" menu.
Example: The following escape sequence will set line spacing to 8/72 of an inch, for use with eight wire graphics.
Escape Sequence: | ESC | A | 8 |
Hexadecimal: | 1B | 41 | 08 |
Horizontal Position
Carriage Return | CR |
Causes the current line to be printed, and then sets the current print position to the left margin. If "Auto LF: On" is selected in the "Setup: INTERFACE" menu, a line feed will also be performed.
Control code: | CR |
Hexadecimal: | 0D |
Backspace | BS |
Causes the current line to be printed, and then moves the current print position one space to the left. The actual distance moved depends on the current character spacing. Backspacing can be done up to, but not beyond, the left margin.
Control code: | BS |
Hexadecimal: | 08 |
Page
