IBM Proprinter Emulation
Set Line Spacing to n/216"ESC 3 n
Sets the line spacing to n/216 of an inch per line. 0³n³255. Overrides the "LPI:" value in the "Setup: FORM" menu.
NOTE: The actual resolution of the FormsPro 4000 paper stepper motor is 1/288 of an inch. When spacing is specified in 1/216 of an inch, the printer will actually move paper to the nearest 1/288 of an inch.
Example: The following escape sequence will set line spacing to one half inch.
Escape Sequence: | ESC | 3 | 108 |
Hexadecimal: | 1B | 33 | 6C |
Set Line Spacing to n/72" |
| ESC A n |
Sets the line spacing to n/72 of an inch per line. 0³n³255. Since the distance between print head wires is 1/72 of an inch, this is equivalent to setting n wire spacing. This spacing is stored but does not take effect until ESC 2 is received. Overrides the "LPI:" value in the "Setup: FORM" menu.
Example: The following escape sequence will set line spacing to 8/72 of an inch, for use with eight wire graphics.
Escape Sequence: | ESC | A | 8 |
Hexadecimal: | 1B | 41 | 08 |
Page