ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the elliptical trainer can be assembled suc- cessfully by anyone. However, it is important to realize that the versatile elliptical trainer has many parts and that the assembly process will take time. Most people find that by setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two people.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the elliptical trainer, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
The following tools (not included) are required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One Phillips screwdriver
•Lubricant, such as grease or petroleum jelly, and soapy water.
Assembly will be more convenient if you have a socket set, a set of
1.Remove the sheath covering the Rope (162).
Attach the Right Arm (12) to the Upright Base (1) with an M10 x 25mm Button Screw (87), an M10 x 54mm Button Bolt (90), an M10 Split Washer (114), three M10 Large Black Washers (186), and an M10 Nylon Locknut (81).
Attach the Left Arm (13 [not shown]) in the same manner.
1 |
|
|
|
| 81 |
|
| 186 |
1 | Sheath |
|
| 162 | 12 |
|
| 186 |
|
| 114 |
| 87 | 90 |
5
