HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS
To use iFIT.com CDs or videocassettes, the exercise cycle must be connected to your portable CD player, portable stereo, home stereo, computer with CD play- er, or VCR. See HOW TO CONNECT YOUR CD PLAYER, VCR, OR COMPUTER on pages 15 to 17.
To purchase iFIT.com CDs and videocassettes, call the
Follow the steps below to use an iFIT.com CD or video program.
1 Begin pedaling to activate the console.
The program will function in almost the same way as a preset program (see steps 3 and 4 on page 12). However, an electronic “chirping” sound will alert you when the resistance of the pedals and/or the target pace is about to change.
Note: If the resistance of the pedals and/or the target pace does not change when a “chirp” is heard:
•Make sure that the indicator above the iFIT.com button is lit.
•Adjust the volume of your CD player or VCR. If the volume is too high or too low, the con- sole may not detect the program signals.
•Make sure that the audio cable is properly connected and that it is fully plugged in.
See step 1 on page 10.
| Select the iFIT.com mode. | 5 | Monitor your progress with the two displays. |
2 |
| See step 4 on page 10. |
To select the iFIT.com mode, press the iFIT.com button. The indicator on the button will light.
6 |
7 |
Measure your heart rate if desired.
See step 5 on page 11.
Turn on the fan if desired.
3 Insert the iFIT.com CD or videocassette.
If you are using an iFIT.com CD, insert the CD into your CD player. If you are using an iFIT.com videocassette, insert the videocassette into your VCR.
4 PressVCR. the play button on your CD player or
See step 6 on page 11.
When you are finished exercising, the console
8 will automatically turn off.
See step 7 on page 11.
A moment after the play button is pressed, your personal trainer will begin guiding you through your workout. Simply follow your personal trainer’s instructions.
18
