FastTrak S150 TX2plus User Manual
14
Do you want the disk image to be
duplicated to another or do quick
initialize or create only?
Y - Create and Duplicate
N - Create Only
I - Create and Quick Initialize
3. Press Y for the Create and Duplicate option. The window below will appear
asking you to select the Source drive to use. FastBuild will copy all data
from the Source drive to the Target drive.
Source Disk
Channel:ID Drive Model Capacity (MB)
----- ----- -----
Target Disk
Channel:ID Drive Model Capacity (MB)
----- ----- -----
[Please Select A Source Disk]
Channel:ID Drive Model Capacity (MB)
1 : SEAGATE S380023AS 80024
2 : SEAGATE S380023AS 80024
[↑] Up [↓] Down [ESC] Exit [Ctrl-Y] Save
4. Use the arrow keys to choose which drive contains the existing data to be
copied.
5. Press Ctrl-Y to Save selection and start duplication. The following progress
screen will appear.
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
6. Select Y to continue. If you choose N, you will be returned to step 1.
7. Once complete, the following screen will appear confirming that your
Security array has been created. Press any key to reboot the system.