![](/images/new-backgrounds/1194029/19402963x1.webp)
FastTrak S150 TX2plus User Manual
Assigning Drive(s) to Array
1.Under the Drive Assignments section, highlight a drive by pressing the ↑ and ↓ keys.
2.Press the Spacebar to change the Assignable option to Y to add the drive to the disk array.
3.Press
•If choosing a Striping or Mirroring/Striping array, the initial Define Array Menu screen will appear with the arrays defined. From there you may ESC to exit and return to the Main Menu of FastBuild.
•If you selected a Mirroring array for two drives, there is an additional window that appears as described in order to create the array. To do this you will use either two brand new drives, or one drive that contains existing data that you wish to mirror.
Creating a Striped Array
As described in the Drive Assignments Option section above, if you selected a performance array, follow the directions here.
1.Set the Stripe Block size. 64 KB is the default.
2.Assign new drives to the Performance array.
You may assign from one to four drives. If you assign only one drive, there will be no performance benefit
3.Save the information by pressing
Your system will reboot when you exit the FastBuild Utility.
28