FastTrak S150 TX2plus User Manual
8
TX2plus
FastTrak 150
Figure 2. FastTrak S150 TX2plus card
5. Attach the Y-cable power splitters to the Serial ATA hard drives.
6. Use existing power cables for the Parallel ATA hard drives.
Note
The FastTrak S150 TX2plus RAID controller is a PCI Plug-n-Play
(PnP) device. No changes are necessary in the Motherboard
CMOS Setup for resources or drive types in most applications.
Port 1
(Serial)
Port 2
(Serial)
Port 3
(Parallel)
Pin 1
LED Pins
for future
use