PYLE Audio 670 manual Calling

		Troubleshooting Your Phone
Calling
Symptom	Problem	Corrective Action
There is no dial tone.	Power is not correctly applied to	Do one of the following:
	the SoundPoint IP 670 phone.	• Check that the screen is illuminated.
		• Make sure the LAN cable is inserted
		properly at the back of the phone (try
		unplugging and re-inserting the
		cable).
		• If using in-line powering, have your
		system administrator check that the
		switch is supplying power to the
		phone.
	Dial tone is not present on one of	Do one of the following:
	the audio modes.	• Switch between Handset, Headset (if
		present) or Hands-Free
		Speakerphone to see if the dial tone is
		present for one of audio modes.
		• If the dial tone exists on another audio
		mode, connect a different handset or
		headset to isolate the problem.
	The phone is not registered.	Contact your system administrator.
The phone does not ring.	Ring setting or volume is low.	Do one of the following:
		• Adjust the ringing level from the front
		panel using the volume up/down keys.
		• Check status of Handset, Headset (if
		connected), and Hands-Free
		Speakerphone.
	Outbound or inbound calling is	Do one of the following:
	unsuccessful.	• Place a call to the phone under
		investigation. Check that the screen
		indicates incoming call information.
		• Lift the handset. Ensure the dial tone
		is present and place a call to another
		extension or number. Check that the
		screen changes in response.

6 - 5