Q-Logic 5800V - page 122

Installation Guide Stackable Fibre Channel Switch

5800V Series

Glossary-4 59265-02 B

IKE Policy

An IKE profile that defines the type of data

traffic to secure between the switch and

the peer, and how to encrypt that data.

See Internet Key Exchange (IKE).

Inband Management

The ability to manage a switch through

another switch over an inter-switch link.

Initiator

The device that initiates a data exchange

with a target device.

In-Order Delivery

A feature that requires that frames be

received in the same order in which they

were sent.

Input Power LED

A chassis LED that indicates that the

switch logic circuitry is receiving the

correct DC voltages.

Inter-Fabric Zone (IFZ)

A zone that is used to map local devices to

devices on a remote Brocade or Cisco

fabric across a TR_Port. The zone

membership consists of the port WWNs of

the local device, the remote device, and

the TR_Port. The zone name is a concate-

nation of the IFZ prefix, the lowest WWN,

and the remaining WWN, separated by

underscores (_).

Internet Key Exchange (IKE)

A protocol that automates the sharing of

encryption keys and algorithms through

the configuration of matching IP security

associations on the switch and on the

connected device or peer. See IKE Peer

and IKE Policy.

Inter-Switch Link

The connection between two switches

using E_Ports.

IP Security

Encryption-based security for IPv4 and

IPv6 communications through security

policies and security associations. See

Security Association and Security Policy.

License Key

A code associated with a

separately-purchased feature that

activates that feature on the switch.

LIP

Loop Initialization Primitive

Maintenance Button

Momentary button on the switch used to

reset the switch or place the switch in

maintenance mode.

Maintenance Mode

Maintenance mode sets the IP address to

10.0.0.1, and provides access to the

switch for maintenance purposes.

Management Information Base

A set of guidelines and definitions for

SNMP functions.

Management Workstation

PC workstation that manages the fabric

through the fabric management switch.

Mesh Topology

A fabric in which each chassis has at least

one port directly connected to every other

chassis in the fabric.

MIB

Management Information Base

Contents

Main Document Revision History Table of Contents Preface 1 General Description 2 Planning 3 Installation 4 Diagnostics/Troubleshooting 5 Removal/Replacement A Specifications Glossary Index List of Figures List of Tables Preface Intended Audience Related Materials Whats New in this Release Safety Notices Sicherheitshinweise Notes informatives relatives la scurit Advertencias de seguridad Communications Statements Federal Communications Commission (FCC) Class A Statement Canadian Department of Communications Class A Compliance Statement Avis de conformit aux normes du ministre des Communications du Canada CE Statement VCCI Class A Statement Laser Safety Information Electrostatic Discharge Sensitivity (ESDS) Precautions Accessible Parts Pices Accessibles Zugngliche Teile General Public License Preamble Terms and Conditions for Copying, Distribution and Modification Page Page Page How to Apply These Terms to Your New Programs Page qfsApp Program License Technical Support Training Contact Information Page Page 1 Figure 1-1. QLogic 5802V Stackable Fibre Channel Switch Chassis Controls and LEDs Figure 1-2. Chassis LEDs and Controls Input Power LED (Green) Heartbeat LED (Green) System Fault LED (Amber) Maintenance Button Resetting a Switch Placing the Switch in Maintenance Mode Fibre Channel Ports Figure 1-3. Fibre Channel Ports Port LEDs Figure 1-4. Port LEDs Port Logged-In LED (Green) Port Activity LED (Green) Transceivers Port Types Table 1-1. Fibre Channel Port Types Ethernet Port Figure 1-5. Ethernet Port Serial Port Figure 1-6. Serial Port and Pin Identification Table 1-2. Serial Port Pin Identification Power Supplies and Fans Model 5800V Model 5802V Figure 1-7. Model 5802V Power Supplies Switch Management QuickTools Web Applet Enterprise Fabric Suite Command Line Interface Application Programming Interface Simple Network Management Protocol Storage Management InitiativeSpecification File Transfer Protocols 2 Devices Device Access Table 2-1. Zoning Database Limits Performance Distance Table 2-2. Port Transmission Distances Bandwidth Table 2-3. Extended Credit Distances and Cable Lengths Latency Feature Licensing Table 2-4. Port-to-Port Latency Multiple Chassis Fabrics Optimizing Device Performance Domain ID, Principal Priority, and Domain ID Lock Stacking Figure 2-1. Two-Switch Stack Figure 2-2. Three-Switch Stack Page Figure 2-5. Six Switch Stack Common Topologies Cascade Topology Figure 2-6. Cascade-with-a-Loop Topology Mesh Topology Figure 2-7. Mesh Topology MultiStage Topology Figure 2-8. Multistage Topology Transparent Routing Page Page Switch Services Page Internet Protocol Support Security User Account Security IP Security Port Binding Connection Security Device Security Page 2Planning Security 2-22 59265-02 B Security Example: Switches and Adapters with Authentication Figure 2-9. Security Example: Switches and Adapters Page Page Security Example: RADIUS Server Figure 2-10. Security Example: RADIUS Server Page Page Page 2Planning Security 59265-02 B 2-29 Security Example: Host Authentication Figure 2-11. Security Example: Management Server Page Fabric Management Page 3 Site Requirements Fabric Management Workstation Switch Power Requirements Environmental Conditions Table 3-1. Management Workstation Requirements Installing a Switch Figure 3-1. QLogic 5802V Fibre Channel Switch Mount the Switch Install the Transceivers Page Configure the Workstation Configuring the Workstation IP Address for Ethernet Connections Windows Workstation Linux or Solaris Workstation Mac OS X Workstation Configuring the Workstation Serial Port Connect the Switch to AC Power Page Connect the Workstation to the Switch Figure 3-4. Workstation Cable Connections Configure the Switch QuickTools Switch Configuration CLI Switch Configuration Cable Devices to the Switch Installing Firmware Using QuickTools to Install Firmware Using the CLI to Install Firmware One-Step Firmware Installation Page Custom Firmware Installation Adding a Switch to an Existing Fabric Installing Feature License Keys Page 4 Chassis Diagnostics Figure 4-1. Chassis LEDs Input Power LED Is Not Lit System Fault LED Is Lit Power-On Self Test Diagnostics Heartbeat LED Blink Patterns Page Configuration File System Error Blink Pattern Figure 4-4. Configuration File System Error Blink Pattern Over-Temperature Blink Pattern Figure 4-5. Over-Temperature Blink Pattern Logged-In LED Indications Figure 4-6. Logged-In LED E_Port Isolation Page Excessive Port Errors Transceiver Diagnostics Power Supply Diagnostics Figure 4-7. Model 5802V Power Supply LEDs Recovering a Switch Using Maintenance Mode Exiting the Maintenance Menu (Option 0) Unpacking a Firmware Image File in Maintenance Mode (Option 1) Page Remaking the File System in Maintenance Mode (Option 6) Resetting the Switch in Maintenance Mode (Option 7) Updating the Boot Loader in Maintenance Mode (Option 8) 5 Transceiver Removal and Replacement Power Supply Removal and Replacement Figure 5-1. Power Supply Removal Figure 5-2. Power Supply Installation Page A Fabric Specifications Page Maintainability Fabric Management Dimensions Electrical Power Cord Specifications Table A-1. Available Power Cords Table A-1. Available Power Cords (Continued) Region/Country Specification QLogic SKU Number Environmental Regulatory Certifications Glossary Page Page Page Page Page Page Page Index Numerics A B C D E F G H I L M N Q R S T U V W X Z